Skip to main content
Jan 01, 2025

FieldView™ Drive 2.0 Installation | Climate Fieldview

Instructions on how to install the FieldView™ Drive 2.0 in the cab and pair the FieldView™ Drive 2.0 to your mobile device.

  • support
  • drive

Equipment Installation

test
  1. With the machine OFF, plug the FieldView™ Drive 2.0 into your machine's 9-pin diagnostic port or adapter cable.
  2. Once it is fully pressed into the diagnostic port, fasten the device securely by turning it to slightly to the right - this will lock the FieldView™ Drive 2.0 into place.
  3. After the FieldView™ Drive 2.0 is plugged in, turn your machine ON.
  4. The status indicator located on the top face of the FieldView™ Drive 2.0 will begin to pulse white multiple time, indicating its powering up and a successful installation.
  5. The status indicator should glow steadily green to show that the FieldView™ Drive 2.0 is seeing data activity but is not yet connected to a mobile device.